Polypropylene Strip Privacy Kit
Wide flexible strips woven horizontally through the wire openings of a panel, passing alternately in front of and behind the upright wires for full privacy.
3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Plastic Slat Privacy Kit
Upright plastic slats that fill the wire openings of a panel for full privacy, with narrower slats at both edges.
Composite Slat Privacy Kit
Upright composite slats that fill the wire openings of a panel for full privacy, in the colours of the range.
Tube Handrail
A smooth round steel tube laid along the top of a panel so that no sharp wire ends are exposed.
Tension Wires
Taut steel wires stretched between the posts, evenly spread from the top edge to the bottom edge of a roll fence.
Top Rail
A tubular steel rail laid along the top edge of chain link fabric between the posts.
Barbed Wire Strand
A strand of two wires carrying sharp four-point barbs at regular intervals, stretched along the top of a fence to deter climbing.
Timber Ringed Column Baluster Square Top
A row of ringed column timber balusters with square blocks at both ends for a plowed handrail, with a fillet strip between the blocks.
Timber Tapered Column Baluster Square Top
A row of tapered column timber balusters with square blocks at both ends for a plowed handrail, with a fillet strip between the blocks.
Timber Ringed Column Baluster Pin Top
A row of ringed column timber balusters with a pin at the top for a drilled handrail and a square block at the foot.
Timber Tapered Column Baluster Pin Top
A row of tapered column timber balusters with a pin at the top for a drilled handrail and a square block at the foot.
Timber Slender Vase Baluster Pin Top
A row of slender vase timber balusters with a pin at the top for a drilled handrail and a square block at the foot.
Timber Beaded Vase Baluster Square Top
A row of beaded vase timber balusters with square blocks at both ends for a plowed handrail, with a fillet strip between the blocks.
Timber Beaded Vase Baluster Pin Top
A row of beaded vase timber balusters with a pin at the top for a drilled handrail and a square block at the foot.
Timber Ringed Taper Baluster Square Top
A row of tapered timber balusters with square blocks at both ends for a plowed handrail, with a fillet strip between the blocks.
Round Post
A machine rounded timber fence post, which can be morticed through in both directions to take the rails of a post and rail fence at a corner.
Timber Ringed Taper Baluster Pin Top
A row of tapered timber balusters with a pin at the top for a drilled handrail and a square block at the foot.
Timber Turned Baluster Square Top
A row of turned timber balusters with square blocks at both ends for a plowed handrail, with a fillet strip between the blocks.
Timber Turned Baluster Pin Top
A row of turned timber balusters with a pin at the top for a drilled handrail and a square block at the foot.
Venetian Scroll Large
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Venetian Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Sphere End Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Cut End Flat Bar Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Baroque Round Bar Scroll Short
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Baroque Round Bar Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Baroque Cut S Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Gabion Module
A stone filled wall segment with a wire mat on each face and steel posts at one or both ends that carry the mats.
Hedgehog Gravel Board
A treated timber gravel board with an opening at one end that lets hedgehogs pass under a fence.
Sloped Bottom Garage Door Section
One steel section of a sectional garage door with a slanted bottom edge, made of an outer and an inner skin around an insulating foam core, so the door…
Top Guide with Rollers
A tube with two steel guide rollers that holds the top of a cantilever sliding gate upright as it slides between them, fixed on a wall plate or built into the…
Bolt On Eyebolt Hinge
A heavy gate hinge that swings a leaf through a half turn on an eyebolt and is bolted to the post and the leaf without any welding.
One Way Vandal Proof Hinge
A small heavy gate hinge that opens a quarter turn only, with an eyebolt screwed into a nut welded in the leaf so that it cannot be tampered with when the…
Ornamental Clamp Hinge
A hinge for light ornamental gates in which a clamp ring on a welded block turns on a short vertical neck and carries a threaded arm into the leaf.
Linear Swing Operator Inward
A linear swing gate operator whose telescopic rod pulls an inward opening leaf open from the property side.
Surface Drop Bolt
A tall drop bolt fixed to the face of a gate leaf that lets a pin fall into the ground to hold a double gate shut.
Lockable Drop Bolt
A drop bolt with a key lock in its head that can hold the pin up or down so that a double gate stays open or shut.
Internal Drop Bolt
A drop bolt that runs inside the hollow edge of a gate leaf and is worked by a lever at a convenient height.
Electric Drop Bolt
A motorised drop bolt in a round aluminium housing that drives a pin into the ground to lock an automated swing gate.
Drop Rod
A long steel rod with a handle that slides in two guides on the face of a gate leaf and drops into the ground to hold a double gate shut.
Ground Catcher
A socket cast into the ground with a square collar that receives the pin of a drop bolt and drains away rain.
Off Centre Ground Stop
A flat aluminium ground stop bolted to the surface beside a double gate with a raised bar that catches the pin of a drop bolt.
Linear Swing Operator Outward
A linear swing gate operator on the street side of an outward opening leaf that pushes the leaf open from a flat extension plate on the post.
Adjustable Gate Stop
A round post with a rubber head that stands on the ground to stop a swinging gate, and can be shortened or lengthened to fit.
Polymer Gate Stop
A tough polymer plate with a rubber bumper that is fixed to a post and stops a gate from slamming against it.
Cast In Hold Back Catch
A galvanised steel post set in concrete with a tumbling aluminium hook that catches a gate rail and holds the leaf open.
Under Gate Catch
An aluminium post set in concrete with a reversible hook that catches the underside of a gate rail and holds the leaf open.
Hydraulic Swing Operator
A linear hydraulic swing gate operator with a square pump block at the post end and a long round cylinder with a chromed rod toward the leaf.
Cantilever Running Rail
A steel running rail in the shape of a square tube with a slot in its underside, welded or bolted under the leaf of a cantilever sliding gate so that it rides…