Sloping Single Socket Tee
A cast railing fitting with a short sleeve for the vertical upright and one socket that is set to the slope of a stair rail.
Tube fittings 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Hinged Side Outlet Tee
A cast railing fitting with a through barrel and a side socket at a right angle, and a hinged socket below that swings to join a rail running down a slope.
Toeboard Railing Flange
A cast base plate with a socket for the upright and a slotted back plate that carries a toeboard.
Sloping Three Socket Tee
A cast railing fitting for a stair rail on a slope, with a long sleeve along the slope and a socket below it for the vertical upright.
Double Offset Fixing Bracket
A cast ring on a tube with a flat tab on each side that holds the edges of panels or boards.
Adjustable Side Outlet Tee
Two cast collars that stack on one upright, each with a side socket, turned against each other to join rails at any angle from a right angle to a straight line.
Level To Sloping Side Outlet Tee
A cast railing fitting for the middle rail where a handrail changes from level to sloping down a steep stair, with the upright passing through it and a socket…
Offset All Wall Flange
A cast wall plate that holds a socket standing off the wall, for a railing that is set away from the face it is fixed to.
Adjustable Slotted Flange
A cast oblong base plate with a slot at each end and a pivoting neck that carries a socket out from the plate, so a rail can be set at a slope.
Offset Wall Bracket
A cast base plate that fixes to a wall, with a stem that carries a collar for the rail out from the wall.
Parapet Flange
A cast mounting plate for the top of a parapet with a socket that leans outward to carry a guardrail above it.
Toe Board Corner Splice
A small right-angle plate with a screw hole in each leg that joins two toe boards at a corner.
Right Angle Toeboard Connector
A small right-angle bracket with a bolt hole in each leg that joins two toe boards at a corner.
Internal Coupling
A cast railing fitting that joins two tubes of the same size end to end from the inside, with a plug in each tube end and a ring that sits flush with the tube.
Add On Handrail Socket
A hinged two part cast ring that closes round an upright already in place and carries a stub for a handrail.
PGR Elbow
A loose cast elbow that joins a top rail to an end post of a pedestrian guardrail.
Four Socket Cross
A cast railing fitting through which the upright passes, with a socket in each of four directions for the rails that meet it.
Rectangular Flange
A cast rectangular base plate that fixes an upright to a floor, with a socket for the tube and a fixing hole in each corner of the plate.
Steep Angle Base Flange
A cast oblong base plate whose socket leans steeply, so an upright can be set to a steep stair slope.
Sheeting Clip Without Hardware
A wide bent steel strap that clips to a tube and fixes flat or profiled sheeting where the load is only positional.
Horizontal Railing Flange
A cast wide wall plate with a tall socket in front of it for fixing an upright with the palm of the plate.
Butt Weld Tee
A welded pipe tee that joins a branch pipe to the side of a run of pipe at a right angle.
Single Offset Fixing Bracket
A cast ring on a tube with one flat tab that holds the edge of a panel or board.
Combination Socket Tee And Crossover
A cast railing fitting for racking that joins a carrying rail to the upright with a socket and leaves a crossing sleeve for a horizontal tie.
Two Socket Cross
A cast railing fitting through which the upright passes, with a socket on each side for the rails that meet it.
Spigot Flange
A cast round base plate with a plug that fits inside a tube, for a light self supporting structure.
Square Flange
A cast square base plate that fixes an upright to a floor, with a socket for the tube and a fixing hole in each corner of the plate.
Sloping Two Socket Cross
A cast railing fitting for a stair rail on a slope, with a long sleeve along the slope and a short sleeve that the vertical upright passes through.
Double Tab Bracket
A cast collar that clamps round a tube, with a slotted flat tab out of each side so the tube can be bolted flat to a surface.
Heavy Duty Rectangular Flange
A heavy cast rectangular base plate that fixes an upright to a floor, with a socket for the tube and a fixing hole in each corner of the plate.
Straight Coupling
A cast railing fitting that joins two tubes of the same size end to end with a sleeve over the outside of both.
Split Single Socket Tee 45 Degrees
A cast railing fitting in two hinged halves that closes around a tube already in place, with a socket set at forty-five degrees for braces and struts.
Variable Elbow
A cast railing fitting that joins two tubes at a slightly bent angle, used where a rail meets a gentle change of slope.
Slight Angle Flange
A cast oblong base plate whose socket leans a little from the vertical, so an upright can follow a gentle ramp or slope.
Hinged Adjustable Tee
A cast railing fitting with a through barrel for the upright and a hinged socket that swings to join a rail at any angle from a right angle to a straight line.
Decorative Ball
A cast ball cap for the top of a railing post, with a flat underside that seats on the tube.
Sloped Floor Flange Square
A cast square base plate whose socket can lean a little from the vertical, so an upright can stand on a slope.
Corner Crossover
A cast corner that joins two rails at a right angle and lets an upright pass beside the corner.
Set Screw Cap
A small grey plastic cap that pushes into the recess of a set screw to finish a galvanised fitting.
Roof Flange
A cast rectangular base plate with a ring of fixing holes around its edge and a socket in the middle, for an upright fixed down through a roof deck.
Split Four Socket Cross
A cast railing fitting in two hinged halves that closes around an upright already in place, with a socket in each of four directions for rails.
Swivel Tee
A cast ring on a tube with a short internal spigot that fits into the socket of another fitting at a varying angle.
Single Tab Bracket
A cast collar that clamps round a tube, with one slotted flat tab out of a side so the tube can be bolted flat to a surface.
PGR Two Socket Cross
A loose cast cross that joins a mid rail to an intermediate upright of a pedestrian guardrail, the upright passing through it.
Rail Support
A cast ring on a small base plate that carries a handrail tube along a wall.
High Capacity Base Flange
A heavy cast square base plate with a socket for the tube and a fixing hole in each corner, for railings that carry crowds.
Single Handrail Socket
A cast ring on an upright with one stub that carries a handrail out from the post.
Level To Sloping Side Outlet Elbow
A cast railing fitting for the top rail where a handrail changes from level to sloping down a steep stair, with a socket for the post, one for the level rail…