Knob Cylinder
A lock insert with a fixed knob on the outside and a key on the inside.
Locks, Cylinders and Latching Fittings 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Thumb Turn Cylinder
A lock insert with a key on the outside and a turn piece on the inside for opening without a key.
Half Cylinder
A short lock insert turned by a key from one side only, with a turn piece or handle spindle on the other.
Double Cylinder
A lock insert turned by a key from either side of the door.
Multipoint Lock
A full-height forend lock with a latch, a deadbolt and a row of locking bolts above and below, shown with its angle strike plates on the frame.
Mortice Latch
A narrow forend mortice lock with a spring latch and a deadbolt, shown with its strike plate.
T-Astragal
A T-shaped wood strip that closes the gap between the two leaves of a pair of doors, in a traditional or square form.
Flush Bolt
A bolt set into the edge of a door leaf that locks it to the head and the floor, in a choice of slide or manual operation, length and finish.
Magnetic Catch
A concealed catch held by a magnet, set into the top edge of a door leaf, in a choice of size and finish.
Roller Latch
A mortised catch with a spring roller, set into the top edge of a door leaf, in a choice of size and finish.
Ball Catch
A spring catch with a round ball, fitted into the top edge of a door leaf, in a choice of size and finish.
Deadbolt
A deadbolt with a rose on each side of the door, keyed on one side or on both, in a choice of finish.
Lever Lockset
A latching door lever with a rose on each side, in a choice of passage, privacy or dummy function and finish.