Single Offset Panel Tab
A cast collar for a tube with one flat slotted tab set off to the side, to fix plywood, plastic panels or planks flush to a tube.
Mounts 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Double Extended Panel Tab
A cast collar for a tube with a long flat tab with a fixing hole on each side, to fix panels or flooring to a tube.
Composite Post Skirt
A square trim ring that slips over the foot of a composite post sleeve and hides the cut end and the fixing.
Male Double Horizontal Swivel Socket Member
A cast sleeve for a tube with a flat tongue and pin hole on each side lying at right angles to the tube, for shelving.
Male Single Horizontal Swivel Socket Member
A cast sleeve for a tube with a flat tongue and pin hole lying at right angles to the tube, for shelving.
Single Extended Panel Tab
A cast collar for a tube with one long flat tab with a fixing hole, to fix panels or flooring to a tube.
Female Single Swivel Socket Member
A cast sleeve for a tube ending in a fork with a pin hole, the female half of a single swivel socket.
Screw Ground Anchor
A steel screw anchor with a flat head ring that is turned into the soil beside a plated post to hold it down.
Swivel Flange
A flat cast plate with a lug and a female fork on it, for fixing an angled tube to a wall or floor that swings through a wide range.
Concrete Footing Mount
A buried block of concrete around the foot of a post, square or round, with the post socket cut into its top.
Dowel Base Plate
A flat steel base plate with anchor holes that carries a welded fence post bolted down to concrete or a wall top.
Toe Board Bracket
A bent aluminium angle that fixes a toe board to a floor, with a hole in the foot and a hole in the upright.
Double Offset Panel Tab
A cast collar for a tube with a flat slotted tab on each side, both set off to the same side, to fix panels or flooring flush to a tube.
Swivel Flange Plate
A flat cast plate with two fixing holes and an upstanding lug with a bolt hole, the base of a swivel flange for angled tubes, wall and brace fixings.
Male Corner Swivel Socket Member
A cast sleeve for a tube with two flat tongues at a right angle, the male part of a corner swivel socket.
Adjustable Three Way Swivel Socket
Two cast rings stacked on an upright, each with a tongue and a female fork, so two tubes leave the upright in opposite directions and swing from it.
Single Panel Tab
A cast collar for a tube with one flat slotted tab, to fix plywood, plastic panels or planks to a tube.
Male Single Swivel Socket Member
A cast sleeve for a tube with one flat tongue and a pin hole, the male half of a single swivel socket, also used to fix a flat panel to a tube.
Male Variable Angle Double Swivel Socket Member
A short cast ring for a tube with one flat tongue and a pin hole, stacked in pairs to make an adjustable three way swivel socket.
Male Double Swivel Socket Member
A cast sleeve for a tube with a flat tongue and pin hole on each side, the male part of a double swivel socket.
Block Counterweight Cantilever Mount
A free-standing roof guard base that holds the post on a hinge block and a flat arm carrying a heavy square plastic coated weight.
Single Swivel Socket
A cast swivel joint for two tubes, a female fork and a male tongue on one pin, so the tubes meet at any angle across a wide range.
Double Swivel Socket
A cast swivel joint with a male double member in the middle and a female fork on each side, so two tubes can meet a third at any angle across a wide range.
Corner Swivel Socket
A cast swivel joint with a male corner member and a female fork on each of its two tongues, so two tubes can meet a third at a corner and swing from it.
Slotted Post Foot
A galvanised steel foot with a base plate that is bolted to a hard surface and a strap that is screwed into the slot of a standard slotted timber post.
Counterweight Cantilever Mount
A free-standing roof guard base that holds the post on a cast foot and a long steel tube carrying a heavy plastic weight.
Surface Base Plate With Cover
A square steel base plate bolted to the floor with a cap that covers the plate and the bolts.
Stub Tube Post Base
A short square tube welded between two square plates that carries a square post slid over the tube.
Stanchion Base Plate Mount
A short post stub standing on a square base plate that the railing post slides over.
Fascia Bracket
A steel bracket bolted to the side face of a slab or deck edge that grips the post at an upper and a lower arm.
Roof Cladding Plate Mount
A flat steel plate with a raised oval that fixes a roof guard post to profiled metal roof cladding.
In Floor Ground Socket
A round socket set into concrete with a flange flush with the floor that holds a round tube post.
Aluminium Post Base Plate
A square aluminium plate with four bolt holes under a square aluminium post.
Core Drilled Post Mount
A round hole drilled into the slab and filled with grout around the post, finished with a flat plate over the hole.