Acoustic Timber Board
An interlocking timber member for a noise barrier between grooved posts.
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
An interlocking timber member for a noise barrier between grooved posts.
A flat upright timber member for a lapped privacy or sound fence.
An interlocking timber member for a noise barrier between grooved posts.
A robust playground fence panel of wide planed pales sandwiched between pairs of rails at the top and bottom, built to stand with its posts at wide centres.
A frameless fence panel of horizontal slats fixed alternately on the front and the back of vertical battens with an overlap, so it looks the same from both…
A decorative fence panel of half round pales crossing each other at an angle between two end battens, fixed to two half round rails.
A framed screen of thin battens crossing in a square grid, used on its own or as a topper above a fence panel.
A prefabricated close board fence panel of overlapping feather edge pales whose top dips gently to the middle, held by two or three rails.
A privacy fence panel of upright cedar pickets whose top corners are cut off at an angle, fixed to three backer rails.
A picket style fence panel of narrow pales with elongated curved tops, spaced evenly along two rails, for front gardens where light matters more than privacy.
A framed fence panel whose boards are fixed alternately on the front and back of internal battens with an overlap, so the panel looks the same on both sides…
A framed fence panel of vertical overlapping boards in two layers over a braced perimeter frame, which gives full privacy.
A framed fence panel with horizontal boards below and a band of open horizontal slats above, which keeps privacy low down and lets light through at the top.
A solid fence panel of interlocking tongue and groove boards set in a framed panel, giving full privacy and no sight lines.
A fence panel of thin flexible rods woven in and out of upright stakes, handmade from hazel or willow, giving a natural screen with no frame.
A framed fence panel of horizontal planed boards whose top edge rises in a gentle dome to the middle, giving full privacy and a shaped skyline.
A frameless fence panel with horizontal tongue and groove boards in its lower part and open horizontal slats above, for privacy at the bottom and light at the…
A picket fence panel of flat planed pales with rounded tops, spaced along two rails, installed clear of the ground.
A garden fence field of half round laths crossing each other on the diagonal, fixed to two rails, the traditional scissor fence.
A heavy framed fence panel of thick interlocking tongue and groove boards with a triangulated face that scatters and absorbs noise.
A light square trellis screen of thin battens with a framed top piece and plain side and bottom battens, used on its own or as a topper above a fence panel.
A length of cleft chestnut pale fencing, upright split chestnut pales held at an open spacing by twisted wire running along it.
A heavy frameless hit and miss fence panel of wide boards fixed alternately on the front and back, with a gravel board built in, for sites exposed to high…
A framed fence panel with horizontal boards below and an open lattice of thin battens above, which keeps privacy low down and light high up.
A framed trellis panel of thin battens crossing diagonally to form diamonds, used on its own or as a topper above a fence panel.
A framed fence panel that combines wide hit and miss boards in its lower half with narrow woven slats in its upper half, good on both sides.
A prefabricated close board fence panel of overlapping feather edge pales whose top rises gently to the middle, held by two or three rails.
A roll of upright bamboo canes bound side by side with horizontal wire, unrolled along posts or an existing fence as a natural screen.
A frameless fence panel of Z shaped horizontal boards that interlock with a shadow gap between them and no visible fixings on the front.
A framed fence panel of thin horizontal slats woven in front of and behind vertical rails, good on both sides.
A framed fence panel of wide horizontal slats set at an angle like louvre blinds, which gives privacy while letting some light and air through.
A frameless slatted fence panel meant to be fixed in front of square posts, so the slats read as one continuous run with open gaps between them.
A framed fence panel of interlocking grooved boards without horizontal rails, panelled so that it looks the same on both sides.
A solid fence panel of vertical interlocking boards of alternating widths held by two rails, which gives full privacy and reduces noise.
A framed fence panel of vertical interlocking boards with a top that rises gently to the middle, giving full privacy and a shaped skyline.
A framed fence panel of horizontal flat slats with narrow gaps between them, which lets light and air through.
A framed trellis topper of thin battens in a square grid whose top edge dips gently to the middle, fitted above a fence panel.
A solid framed fence panel of interlocking tongue and groove boards laid horizontally, giving full privacy and no sight lines.
A picket fence panel of flat planed pales with pointed tops, spaced along two rails, installed clear of the ground.
A framed fence panel of horizontal overlapping boards fixed to vertical battens, which gives full privacy and looks the same from both sides.
A framed fence panel of wide and narrow horizontal slats woven in front of and behind vertical rails, good on both sides.
A framed fence panel of horizontal planed boards set in a rebated frame, which gives full privacy with a flat top.
A framed trellis topper of thin battens in a square grid whose top edge rises gently to the middle, fitted above a fence panel.
A prefabricated close board fence panel of lapped feather edge boards nailed to cant rails, with two or three rails.
A fence panel of flat vertical pales spaced along two rails, with an open picket look.