Single Fixing Round Flange
A cast round base plate that fixes an upright to a wall or a floor with one central screw, with a socket for the tube.
Tube fittings 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
PGR Tee
A loose cast tee that joins a mid rail to an end post of a pedestrian guardrail, the post passing through it.
Packer Plate
A flat steel plate that stands a railing flange off the wall so it can sit in a channel or an offset slot.
Butt Weld Elbow
A welded pipe elbow that turns a pipe railing through a right angle on a short, long or three diameter bend.
Steep Slope Acute Angle Elbow
A cast railing fitting that joins a rail running down a steep stair to an end post at a sharp angle.
Adjustable Single Socket Tee
A cast railing fitting with a through sleeve and one socket that is adjusted to any angle between the two, for braces and struts.
Side Outlet Tee
A cast railing fitting through which the upright passes, with two sockets at right angles to each other at the corner of a rail.
Round Base Flange
A cast round base plate with a hidden central fixing hole and a socket for the upright.
Twin Handrail Socket
A cast ring on an upright with a stub on each side that carries a handrail in both directions.
Clamp On Crossover
A cast railing fitting that crosses two tubes at a right angle, one above the other, with a closed sleeve for one tube and an open clamp for the other that…
Tube End Plug
A solid round plug with a domed head that is pushed into the open end of a tube to close it.
PGR Three Socket Tee
A loose cast tee that joins a continuous top rail to an intermediate upright of a pedestrian guardrail.
Adjustable Round Flange
A cast round wall plate with three fixing holes and a pivoting neck that carries a socket out from the wall, so a rail can be set at a slope.
Standard Horizontal Railing Flange
A cast wide wall plate with a socket in front of it for fixing an upright to a wall or a parapet with the palm of the plate.
Heavy Duty Wall Flange
A cast rectangular plate that fixes a rail to a wall, with a collar along the plate that the tube passes through and four fixing holes.
Angle Base Flange Square
A cast rectangular base plate with a socket leaning to a slope, for an upright on a stair or ramp.
Angle Elbow
A cast railing fitting that joins the top rail of a gently sloping guardrail to an end post at a nearly square angle.
Extra Heavy Round Flange
A heavy cast round base plate with a wide rim that fixes an upright to a floor or a wall, with a socket for the tube and four fixing holes.
Inline Toeboard Connector
A flat strap with a bolt hole at each end that joins two toe boards end to end.
Angle Base Flange
A cast oblong base plate whose socket leans to the slope of a ramp or stair, so an upright can be set at a moderate angle.
Slight Slope Three Socket Tee
A cast railing fitting for a rail on a gentle ramp, with a long sleeve along the slope and a socket below it for the vertical upright.
Wall Flange
A cast triangular wall plate with three fixing holes and a socket on its front that fixes an upright to a wall.
Adjustable Cross
A cast railing fitting with a long sleeve for a sloping rail and a vertical collar for an upright that stays plumb, for stair railings.
Slotted Base Flange
A cast oblong base plate with a slot at each end and a socket in the middle, so an upright can be set a little either way when it is bolted down.
Stair Tread Support
A cast ring with two bolt ears that carries a stair tread across two tubes.