Horizontal Board Panel
A privacy fence panel of level tongue and groove vinyl boards stacked between a top and a bottom rail and held by a channel at each post.
3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Horizontal Slat Panel
A semi-private fence panel of level vinyl slats with open gaps between them, held by a top and a bottom rail and one upright brace.
Steel Barrier Foot
A long hollow steel barrier that lies on the ground along the fence line and carries the posts and panels on its top.
Plated Base Foot
A flat steel base plate welded to the foot of a post so the fence stands on the ground without a foundation, with an optional larger extension plate for…
Tubular Foot
A removable steel tube bent into an arch that stands on the ground across the fence line and carries a panel or barrier upright.
Weld On Eyebolt Hinge
A heavy gate hinge that swings a leaf through a half turn on an eyebolt held between two ears welded to the post.
Double Return Stair
A stair with one central flight up to a wide landing and two side flights leaving it in opposite directions, fitted to the floor-to-floor height. Risers and…
Alternating Tread Flight
A steep stair flight of staggered half-width treads, each step on the left or the right of a central stringer in turn.
Double Stringer Flight
A straight stair flight carried by two uncut structural sections under the treads, parallel to the pitch line, each tread held on a mount bracket at both ends.
Round Lazy Susan
Round rotating shelves with a raised wood rim that turn together on a centre post.
Pie Cut Lazy Susan
Rotating shelves cut from a circle with a square notch for a corner cabinet, on a centre post.
Rail Operator with Link Arm
A ceiling rail garage door operator with a belt or chain driven carriage and a straight link arm to the top of the door.
Rail Operator for Side Sliding Doors
A rail garage door operator laid along the width of a side sliding sectional door, with a carriage that pulls the lead section along the track.
Leaf Mounted Operator
A compact actuator that is fixed on the edge of a tilting garage door leaf and turns the lever arms of the door.
Tubular Motor
A tubular drive motor that slides into the winding shaft of a roller garage door.
Jackshaft Operator
A shaft operator that sits beside the torsion shaft of a sectional door and turns it through a chain or a direct coupling.
Rail Operator with Bow Arm
A ceiling rail garage door operator whose curved bow arm follows the top of a canopy up and over door.
Aluminium Frame Garage Door Section
One section of a sectional garage door built as an aluminium frame of stiles and rails around glass or panel infill.
Standard Lift Garage Door Track Set
The guide tracks of a sectional garage door that rises along a vertical track and a bend into a horizontal run under the ceiling.
High Lift Garage Door Track Set
The guide tracks of a sectional garage door whose vertical track rises above the door top before the bend, so the door lifts clear in the opening.
Roof Slope Garage Door Track Set
The guide tracks of a sectional garage door whose horizontal run rises at the pitch of the roof behind the opening.
Vertical Lift Garage Door Track Set
The guide tracks of a sectional garage door that rises straight up behind the opening on two tall vertical tracks held back to the wall.
Hooked Crescent Slat Profile
The cross section of one roller door slat, a bowed shell with a hook on top and a socket below.
Double Wall Bar Slat Profile
The cross section of one slat of a double wall aluminium roller door, a straight bar with a rolled hook at each end.
Window Frame Slat Profile
The cross section of a roller door slat with a window opening, a top rail and a bottom rail with the opening between them.
Web Vent Slat Profile
The cross section of a ventilation slat, a thin web between a hook above and a channel below.
Vinyl Fence Finish
Colours and woodgrain finishes of vinyl and composite fence parts.
Pointed Palisade Pale
A roll-formed steel palisade pale cut to a single point at the top, in the D or the W section.
Triple Point Palisade Pale
A roll-formed steel palisade pale whose top is cut into three prongs, in the D or the W section.
Rounded Palisade Pale
A roll-formed steel palisade pale with a rounded top, in the D or the W section.
Round And Notched Palisade Pale
A roll-formed steel palisade pale with a rounded top and a notch on each edge, in the D or the W section.
Square Cut Palisade Pale
A roll-formed steel palisade pale with a square cut top, in the D or the W section.
Triangular Wire Post
A lightweight post made of three vertical steel wires joined by zig-zag wires into a triangular section.
Round Tube Post With Fixing Strip
A round steel tube post with a folded fixing strip along one side that holds clips or collars for the fence.
H Section Post
A tubular steel post pressed into an H shape so that fence panels slot into the grooves on both sides.
Slot Section Post
A folded steel post with curled flanges that hold wire panels slid in from the side without extra fixings.
Tee Section Post
A hot-rolled steel post of T section used as the line post of strained wire fences.
I Beam Post
A hot-rolled steel I section post with parallel flanges, the standard post of palisade fences.
Omega Post With Closing Plate
An open omega-shaped steel post whose flat closing plate clamps the wire panels to its flanges.
Arched Omega Post
An open steel post with a rounded crown and outward flanges whose cover plate holds the fence panels from the front.
Dowel Base Plate
A flat steel base plate with anchor holes that carries a welded fence post bolted down to concrete or a wall top.
Continuous Clamp Bar
A flat steel bar that runs the full height of a post and clamps the edge of a wire panel to it with security bolts.
Tension Bar And Band
A flat steel tension bar that holds the end of a roll of fence fabric against a round post, strapped on by tension bands.
Half Round Rail
A machine rounded half round timber rail whose flat face is nailed to the face of the posts.
Cant Rail
A sawn timber rail with one edge cut at a slope so that water runs off it, nailed behind the boards of a fence.
Flat Post Cap
A flat timber cap that sits on the top of a square post and overhangs it on every side to shed water from the end grain.
Half Round Post Cap
A timber post cap with a half round dome that gives the top of a square post a clean rounded finish.
Slotted Post
A planed timber fence post with slots that take the edges of fence panels, made as an intermediate, corner or end post.