Railing Flange
A cast base plate that fixes an upright to a floor, with a vertical socket for the tube and two fixing holes in the plate.
3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Rail Foot Block
A small rectangular block that stands under the bottom rail of a composite railing section and carries it above the deck.
Rail Crush Block
A square block that stands under the bottom rail of a composite railing section and rests on the deck or the stair tread.
Quick-Connect Fitting
A push-in cable fitting that sits in a post hole and clamps the cable by itself, finished with a round head.
Premier Top Rail Section
A crowned composite top rail with a wide cap that steps in above two tapering legs.
Premier Bottom Rail Section
A composite bottom rail with a flat top, stepped shoulders and two short legs.
Plain End Square Bar Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Plain Block Plinth
A plain stone plinth block with square sides and softly rounded top corners.
Pitched Coping
A stone coping with a gently pitched top and rounded edges along both sides, for the top of a wall or balustrade.
Peaked Colonial Handrail Section
A colonial handrail with a gently peaked top and a bead above the base.
Parapet Upstand Shoe Section
The cross section of a low aluminium shoe for glass that stands on a parapet wall or a low upstand.
Over-Post Rail Bracket
A stainless steel handrail bracket that stands on the top of a round post and carries the rail on a flat saddle plate.
Oval Wall Handrail Section
A broad oval wall handrail with a flat side for mounting.
Oval Rail Section
A broad oval handrail with a flat underside.
Once Weathered Coping
A stone coping that slopes from a high edge to a low edge to shed water one way, with a drip groove under each edge.
Notched Bar Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Narrow Waisted Handrail Section
A slim handrail with a narrow waist between a rounded top and a broad base.
Moulded Plinth
A stone plinth course with a rounded bead and a hollow moulding along each upper edge.
Mortar U Channel Section
The cross section of a compact aluminium U channel in which the glass module is bonded with injection mortar.
Masonry Turned Baluster
A row of cast stone balusters, each a round turned shaft between a square base block and a square cap block.
Masonry Square Baluster
A row of cast stone balusters that are square in section, with the turned outline showing on all four faces.
MagnaLatch Magnetic Gate Latch
A tall vertical pull magnetic gate latch with a release knob at the top, a catch block at the foot and two strike tabs for the post.
Low Bullnose Handrail Section
A wide low handrail with a gently curved top and a rounded shoulder.
LokkLatch Key Lockable Gate Latch
A key lockable gate latch with a pull handle on the gate, a latch housing, trim covers over the frame clamps and a strike on the post.
Kee Klamp Wall Mounted End Return
A bent return that ends a round handrail against a wall on a round mounting flange.
Kee Klamp Variable Angle Elbow
A hinged elbow that sets any angle between two lengths of round handrail tube, for a rake or a corner.
Kee Klamp Solid Elbow
A smooth ninety degree elbow that joins two lengths of round handrail tube at a corner.
Kee Klamp Internal Coupling
A coupling with a visible collar that joins two lengths of round handrail tube end to end.
In Floor Ground Socket
A round socket set into concrete with a flange flush with the floor that holds a round tube post.
In Floor Channel Section
The cross section of a bearing channel that is cast into a concrete floor so that only the glass shows above the surface.
Horizontal Rod Infill
Level round rods or tubes running between two supports, stacked so no opening is wider than the chosen limit.
Horizontal Cable Infill
Level stainless cables stretched between two supports at a tight even spacing.
Hook On Side Profile Section
The cross section of a substructure profile fixed to the side of the floor slab, with a cover skirt, on which a glass module is hooked.
Grab Bar
A graspable support bar that follows a path along a wall and is fixed to the wall at its ends and at intervals. Straight, cornered or sloped path Round tube…
Glass U-Cap Rail Section
A stainless steel U-shaped cap that covers the top edge of a glass panel.
Glass Standoff Button
A round stainless steel standoff that holds a drilled glass pane off a wall or slab edge with a flat button head.
Glass Spigot
A round stainless steel spigot on a domed flange that holds one glass pane upright in a vertical slot.
Glass Spider Adapter
A round stainless steel adapter that screws into a post and holds a drilled glass pane with a flat button head.
Glass Post Clamp
A flat stainless steel clamp with rounded outer corners that holds the edge of a glass pane against a post.
Frameless Glass Gate
A swinging gate made of one toughened glass leaf hung on glass hinges, with no frame around the glass. Glass thickness and tint Two or three hinges Optional…
Framed Gate
A swinging gate for a railing opening, with a welded frame, two posts, hinges and an optional latch. Infill style Post section and post mount Self closing…
Box Newel Post
A hollow box style timber newel with a narrower upper body, projecting shelf mouldings and a full width square base block.
Blank Newel Post
A plain solid square timber post with no turning and no mouldings.
Aluminium Post Base Plate
A square aluminium plate with four bolt holes under a square aluminium post.
Flat Coping
A flat-topped stone coping with a drip groove under each edge, for the top of a wall or balustrade.
Forged Ridged End Scroll
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.
Concealed Flange Wall Bracket
A round tube handrail bracket that stands off a wall on a flat round flange.
Forged Cut End C Scroll Wide
A bar bent into a scroll with curled ends, to decorate a railing panel or a gate.