Precast Stoop Flight
A solid precast concrete stoop whose steps and top platform are cast as one piece.
Stair Flights 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Cladding Flight
A set of oak boards that overlays an existing flight with new treads and risers and a veneer on the strings.
Paddle Alternating Flight
A steep stair flight whose cut-corner plate treads alternate from the left and the right of a central stringer.
Rod Hung Flight
A stair flight whose treads sit between two slender steel stringers, each tread hung on a thin steel rod that fans out to ceiling anchors above.
Alternating Tread Flight
A steep stair flight of staggered half-width treads, each step on the left or the right of a central stringer in turn.
Hung Flight
A stair flight whose treads hang from a pair of rods at each step, carried by the railing or a tie above.
Wall Cantilever Flight
A stair flight whose treads project from a wall, each held by anchor rods set into the wall.
Central Spine Flight
A stair flight carried by one steel spine under the centre line, each tread held on its own bracket.
Open Stringer Flight
A straight stair flight on two cut strings that carry the treads from below and leave the ends of the treads and the risers in view.
Closed Stringer Flight
A straight stair flight with a housed string on each side that encloses the treads and, optionally, the riser boards.
Folded Plate Flight
A cast concrete flight of stairs made of one plate folded into treads and risers, with no slab under the steps.
Waist Slab Flight
A cast concrete flight of stairs, one solid body whose steps sit on a sloping slab.
Block Steps Flight
A flight of stairs made of solid blocks, each step one block laid on a prepared bed with no stringer.
Double Stringer Flight
A straight stair flight carried by two uncut structural sections under the treads, parallel to the pitch line, each tread held on a mount bracket at both ends.