Rail Support
A cast ring on a small base plate that carries a handrail tube along a wall.
Tube fittings 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Stair Tread Support
A cast ring with two bolt ears that carries a stair tread across two tubes.
Double Tab Bracket
A cast collar that clamps round a tube, with a slotted flat tab out of each side so the tube can be bolted flat to a surface.
Single Tab Bracket
A cast collar that clamps round a tube, with one slotted flat tab out of a side so the tube can be bolted flat to a surface.
Triangular Wall Flange
A cast wall plate with a pointed outline and three fixing holes, carrying a collar along the plate that the tube passes through.
Offset Wall Bracket
A cast base plate that fixes to a wall, with a stem that carries a collar for the rail out from the wall.
Heavy Duty Wall Flange
A cast rectangular plate that fixes a rail to a wall, with a collar along the plate that the tube passes through and four fixing holes.
PGR Tee
A loose cast tee that joins a mid rail to an end post of a pedestrian guardrail, the post passing through it.
Single Socket Tee 45 Degrees
A cast railing fitting with a short sleeve over the through tube and one socket set at forty-five degrees, for braces and struts.
Clamp On Tee
A cast railing fitting with an open clamp that snaps onto a tube already in place and a socket for a second tube at a right angle, held by one bolt.
Split Single Socket Tee 45 Degrees
A cast railing fitting in two hinged halves that closes around a tube already in place, with a socket set at forty-five degrees for braces and struts.
Split Single Socket Tee
A cast railing fitting in two hinged halves that closes around a tube already in place, with a socket for a second tube at a right angle.
Swivel Tee
A cast ring on a tube with a short internal spigot that fits into the socket of another fitting at a varying angle.
PGR Two Socket Cross
A loose cast cross that joins a mid rail to an intermediate upright of a pedestrian guardrail, the upright passing through it.
Combination Socket Tee And Crossover
A cast railing fitting for racking that joins a carrying rail to the upright with a socket and leaves a crossing sleeve for a horizontal tie.
Crossover Coupling
A cast sleeve that joins two lengths of rail end to end with a second sleeve crossing it at a right angle.
Clamp On Crossover
A cast railing fitting that crosses two tubes at a right angle, one above the other, with a closed sleeve for one tube and an open clamp for the other that…
Split Crossover
A cast railing fitting that crosses two tubes at a right angle, one above the other, with a closed sleeve and a hinged split clamp that can be added to a…
Split Two Socket Cross
A cast railing fitting in two hinged halves that closes around a tube already in place, with two sockets at a right angle to each other for rails.
Split Three Socket Cross
A cast railing fitting in two hinged halves that closes around an upright already in place, with a socket on each side and one at the front for rails.
Split Four Socket Cross
A cast railing fitting in two hinged halves that closes around an upright already in place, with a socket in each of four directions for rails.
Crossover
A cast railing fitting that crosses two tubes at a right angle, one above the other, with a sleeve for each.
Four Socket Cross
A cast railing fitting through which the upright passes, with a socket in each of four directions for the rails that meet it.
Three Socket Cross
A cast railing fitting through which the upright passes, with a socket on each side and one more at a right angle for the rails that meet it.
Two Socket Cross
A cast railing fitting through which the upright passes, with a socket on each side for the rails that meet it.
Ridge Fitting
A cast railing fitting for small building frames that joins a ridge purlin passing through it, two rafters falling away from it and a truss post below.
Eaves Fitting
A cast railing fitting for small building frames that joins a purlin passing through it, a rafter rising from it, a horizontal brace and a post below.
PGR Three Socket Tee
A loose cast tee that joins a continuous top rail to an intermediate upright of a pedestrian guardrail.
Angle Tee
A cast railing fitting that joins a tube running through a collar to a second tube leaving it at a slant of forty five degrees from a right angle.
Butt Weld Tee
A welded pipe tee that joins a branch pipe to the side of a run of pipe at a right angle.
Single Socket Tee
A cast railing fitting where a short sleeve slips over the through tube and a socket joins a second tube to it at a right angle.
Three Socket Tee
A cast railing fitting that joins a through tube and a tube meeting it at a right angle, with one socket for each.
Sloped Floor Flange Square
A cast square base plate whose socket can lean a little from the vertical, so an upright can stand on a slope.
Steep Angle Base Flange
A cast oblong base plate whose socket leans steeply, so an upright can be set to a steep stair slope.
Angle Base Flange
A cast oblong base plate whose socket leans to the slope of a ramp or stair, so an upright can be set at a moderate angle.
Slight Angle Flange
A cast oblong base plate whose socket leans a little from the vertical, so an upright can follow a gentle ramp or slope.
Corner Crossover
A cast corner that joins two rails at a right angle and lets an upright pass beside the corner.
Side Outlet Elbow
A cast railing fitting that joins the end of an upright and two rails at a right angle, used at the corner of a top rail.
Side Outlet Tee
A cast railing fitting through which the upright passes, with two sockets at right angles to each other at the corner of a rail.
Level To Sloping Side Outlet Elbow
A cast railing fitting for the top rail where a handrail changes from level to sloping down a steep stair, with a socket for the post, one for the level rail…
Level To Sloping Side Outlet Tee
A cast railing fitting for the middle rail where a handrail changes from level to sloping down a steep stair, with the upright passing through it and a socket…
Level To Sloping Cross
A cast railing fitting through which the upright passes, where a level mid rail turns onto a stair rail running down or up.
Level To Sloping Tee
A cast railing fitting where a level top rail turns onto a stair rail running down or up, with a socket for the upright below.
Hinged Adjustable Cross
A cast railing fitting with a through barrel for the upright and a hinged socket on each side, each swinging to join a rail at any angle from a right angle to…
Hinged Adjustable Tee
A cast railing fitting with a through barrel for the upright and a hinged socket that swings to join a rail at any angle from a right angle to a straight line.
Adjustable Single Socket Tee
A cast railing fitting with a through sleeve and one socket that is adjusted to any angle between the two, for braces and struts.
Slight Slope Single Socket Tee
A cast railing fitting with a short sleeve for the vertical upright and one socket set to the slope of a gentle ramp.
Sloping Single Socket Tee
A cast railing fitting with a short sleeve for the vertical upright and one socket that is set to the slope of a stair rail.