Double Glass Unit
Two panes of glass sealed around a spacer, with an optional laminated room side.
3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Flat Sandwich Panel
A plain insulated panel with a smooth face on each side, in a choice of colour.
Triple Glass Unit
Three panes of glass sealed around two spacers, with an optional laminated room side.
Single Glass
A pane of glass, plain or laminated, in a choice of tint.
Fire Resistant Glass
A single thick pane of fire-resistant laminated glass in a choice of tint.
Rounded Bead
A glazing bead with a sloping face that ends in a smooth rounded nose.
Ovolo Bead
A glazing bead with a classic moulded face: a rounded shoulder, a gentle slope and a rounded nose.
Bevelled Bead
A glazing bead with a sloping face that falls away from the glass towards the room.
Square Bead
A plain rectangular glazing bead with flat faces and square corners.
Double Rebate Flush Frame
A frame with a seat on each face, a tall chamfered stop on the outside and a second stop on the wall side, so a sash can sit flush with either face.
Stepped Rebate Frame
A deep frame with a tall stop wall on the outside, a stepped seat for an inward opening sash and a low lip on the inside.
Renovation Frame
A stepped frame with a long wing along its inside face that covers the old frame when a window is replaced.
Door Frame with Threshold Seat
A deep door frame with a tall chamfered stop on the outside whose feet stand on the threshold of a single door.
Mono-block Frame
A shallow frame for a window set inside the insulation layer, with a long sloped apron that covers the insulation on the outside.
Outward Opening Frame
A deep frame turned around so the tall stop wall is on the inside and the sash opens outwards over the low outer lip.
Hidden Vent Block Frame
A wide block frame that holds the glass in a pocket between a deep outer lip and a thin inner lip, so no sash shows from outside.
Thumb Turn Cylinder
A lock insert with a key on the outside and a turn piece on the inside for opening without a key.
Half Cylinder
A short lock insert turned by a key from one side only, with a turn piece or handle spindle on the other.
Double Cylinder
A lock insert turned by a key from either side of the door.
Knob Cylinder
A lock insert with a fixed knob on the outside and a key on the inside.
Glass Dividing Bar
A bar that splits an opening into separate panes, each pane held against the bar on its own side.
In-Glass Grid Bar
A slim bar held between the panes of a sealed glass unit to give a divided look.
Applied Clip-On Bar
A shaped bar fixed to the outside of the glass to imitate a divided pane.
Glass Leaf Face
A slab door face that is all glass held behind a square border, in a choice of glass.
Flat Leaf Face
A plain smooth face for a slab door leaf, in a choice of colour.
Mortice Latch
A short forend lock with a spring latch and an optional deadbolt, shown with its strike plate.
Multipoint Lock
A full-height forend with a latch, a deadbolt, a row of swing bolts and locking pins, shown with its continuous strike strip.
Folding Track
A low guide track for folding doors with a guide groove on each side of a central channel.
Lift Slide Low Rail Track
A low sill for lift and slide doors with two raised running rails joined by an insulating strip.
Three Rail Track
A sliding track with three parallel running rails for three sashes.
Two Rail Track
A sliding track with two parallel running rails for two sashes passing each other.
Monorail Track
A sliding track with one running rail beside the seat of a fixed light.
Hinged Screen
A hinged frame with insect netting that swings open from a fixed outer frame, in a choice of frame colours.
Sliding Screen
A sliding frame with insect netting that runs on a track along the opening, in a choice of frame colours.
Pleated Screen
Folded insect netting that draws across the opening on a floor track, in a choice of frame colours.
Roller Screen
Insect netting that unrolls from a top box between two guide rails and is drawn down by a pull bar, in a choice of frame colours.
Fixed Screen
A flat frame holding insect netting across a window opening, in a choice of frame colours.
Symmetric Mullion
A centred post that divides two equal lights, with a glass pocket on each side of its stem.
Corner Post
A square post for a right-angle corner, rounded at the outer corner and cut back at the inner corner where the two window frames meet.
Meeting Stile
A narrow upright where two opening sashes meet, with a sealing lip that the closing sash bears on.
Structural Mullion
A deep post that carries heavy wind pressure, with a broad front plate, a slim neck and a boxed back for tall openings.
Asymmetric Mullion
A post whose stem sits off centre, giving one side a wider glass pocket than the other.
Lift And Slide Handle
A tall flat-grip handle for lift and slide doors, mounted on a long cover plate.
Narrow Stile Handle
A lever on a long slim cover plate made for slim door stiles, fitted on both faces of the leaf.
Panic Push Bar
A horizontal push bar on two end housings for emergency exit doors, in a choice of finish.
Stand-off Bar Pull
A long vertical bar pull held off the leaf face on two posts, in a round or square bar and a choice of finish.
Flush Pull Handle
A pull handle set flush into the leaf face with a recessed grip, in a choice of finish.
Door Knob
A round knob on a round rose, fitted on the outside face only or on both faces of the leaf.