Double Anchor Glass Clamp
A bullet-shaped stainless steel base clamp with a steel core that holds one glass pane upright from two anchors in the floor.
3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
End Stop
A swaged cable stopper that holds the cable at the post and shows a round, countersunk or ball head.
Flat Collar Square Hole
A low flat ring with a square hole that covers the foot of a square bar.
Flat Collar
A low flat ring with a round hole that covers the foot of a bar.
Flat Top Handrail Section
A handrail with a flat top, rounded shoulders and a narrower base.
Ball Finial
A smooth stone ball with a small flat underneath, to crown a pier or a gate post.
Flat Bar Rail Section
A thin flat bar used as an intermediate rail or a slim top rail.
Angle Elbow
A cast railing fitting that joins the top rail of a gently sloping guardrail to an end post at a nearly square angle.
Acute Angle Elbow
A cast railing fitting that joins a rail running down a gentle stair to an end post at an acute angle.
Fascia Mount Base Shoe Section
The cross section of an aluminium shoe that is bolted to the edge of the floor slab and holds the foot of a glass panel in a deep slot.
Extruded Aerofoil Rail Section
An extruded aluminium top rail with a domed aerofoil top.
Curled Flange T Rail Section
A hollow T-shaped top rail with a low arched crown and flanges that curl down at the ends.
Contour Rail Section
A hollow top rail with a broad rounded head and a waisted neck above a narrower base.
Composite Cap Rail Section
A composite top rail with a rounded cap and two legs.
Colonial Handrail Section
A colonial handrail with a rounded top, a narrow waist and a small bead above the base.
Chamfered T Rail Section
A hollow T-shaped top rail with chamfered shoulders and a narrow stem.
Bullnose Handrail Section
A high handrail with a full rounded top and a narrow bead at the base.
Beaded Shoe Rail Section
A narrow shoe rail with a groove in its top face and beaded rounded sides.
Arched Contour Rail Section
A hollow top rail with an arched crown, short side wings and a straight stem.
Angle Rail Section
An equal leg angle used as a rail, one leg standing and the other lying across the top.
Round Tube Rail Section
A round tube used as a handrail or top rail.
Framed Glass Lite
A single toughened glass pane filling the field between two supports, clear or obscure.
Open Back Carcass
A cabinet box with sides, bottom and top and a back that is either finished or left open, for walk-through, peninsula and island cabinets.
Cooker Housing Carcass
The side walls of a cooker housing, open between them, with an optional base.
V Notch Carcass
The cabinet box of a corner base unit whose front is a V-shaped notch between two side walls, with angled front panels, bottom, top, back, shelves and an…
Straight Carcass
The rectangular cabinet box with sides, bottom, top, back, shelves and an optional base.
Sink Carcass
The cabinet box with a front and back rail instead of a top, so a sink bowl drops in.
Rack Carcass
An open cabinet box with fixed shelves and no front, divided by upright boards, crossing braces or a diagonal lattice.
Obtuse Corner Carcass
The cabinet box of a corner unit whose two walls meet at an obtuse angle, inside or outside, with sides, bottom, top, back, shelves and an optional base.
Niche Carcass
The cabinet box with a fixed-board niche for an appliance and an optional raised floor.
L Corner Carcass
The cabinet box of an L-shaped corner unit with two legs, with sides, bottom, top, back, shelves and an optional base.
Hob Carcass
The cabinet box with a front and back rail and a heat insulation board under the hob.
End Shelf Carcass
An open shelf unit that closes the end of a run, with a rounded or square outer end.
Depth Transition Carcass
The cabinet box whose depth steps down along an angled front, for the end of a run.
Curved Corner Carcass
The cabinet box with a rounded outer front corner, for the end of a run.
Corner Sink Carcass
The corner cabinet box with a diagonal front and rails in place of a top, so a sink bowl drops in.
Console Carcass
A shallow cabinet box standing on four legs, with an open shelf between the legs.
Blind Corner Carcass
The cabinet box of a blind corner unit, with a closed blind part beside the access opening, sides, bottom, top, back, shelves and an optional base.
Angle Corner Carcass
The cabinet box of a corner unit with a diagonal front, with sides, bottom, top, back, shelves, optional fixed boards and an optional base.
Pull-out Canisters 5 1/2 Inch
Three metal canisters in a row on the top shelf of a pull-out rack, between two metal rails.
Vanity Sliding Drawer Tray
A sliding top tray for a shallow or wood tiered vanity drawer, in birch plywood, that fits a range of drawer widths.
Vanity Corner Filler
A corner filler strip with two legs that closes an inside corner beside a vanity cabinet.
Wastebasket
A grey plastic wastebasket on full-extension runners, with a front wall, a back wall, two side walls and a floor, for a full height base cabinet.
Tall Filler
A tall solid wood strip that fills a gap beside a tall cabinet, finished on one side only.
Vanity Filler Pull-out Tray
A clear plastic tray replacement for a vanity filler pull-out, sized to the filler width.
Pull-out Cleaning Storage
A pull-out rack with a top insert for a paper towel holder and a plastic bag compartment, between two metal rails.
Vanity Drawer Storage Kit
A rack kit that holds items in a vanity drawer, in birch plywood, sized to the drawer width.
Vanity End Panel With Stile
A vanity end panel with a front stile, finished to match the cabinet exterior.