Clear Acrylic
A transparent acrylic panel that lets light through, used as a heat shield.
3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Standard Decor
Standard decors for cabinets.
Hinge Steel
A nickel plated steel finish for cabinet hinges.
Wall Seal Grey
A soft grey plastic finish for wall seals.
Drawer Glass Grey
A grey tinted glass for the side of a drawer box.
CoreGuard
A polymer sink-base panel material that resists water, leaks and everyday spills.
Thin Decor
Thin decors for cabinets.
Shoe Finish
Plinth shoe finishes for cabinets.
Niche Cladding
A wall cladding panel for the niche between the worktop and the wall units. Decor Metal trim at the bottom, top and wall side
Ceramic Worktop Decor
Ceramic worktop decors for composite stone worktops.
Quartz Worktop Decor
Quartz worktop decors for composite stone worktops.
Ceramic Worktop Decor
Ceramic worktop decors for composite stone worktops.
Slimline Decor
Slimline decors for cabinets.
Birch Plywood
Natural birch veneer plywood, the clear light wood inside a cabinet box.
Bridge Board
A horizontal board that spans between wall units, for example above a hood or a tall appliance. Colour or decor Board length
Step Frame Profile
A flat mitered frame member that steps down twice toward its inner edge, grooved to hold a panel.
Square Applied Moulding
A flat-topped block with softened corners that stands proud of the door face around a panel or pane.
Round Over Edge Profile
A rounded edge routed round the outside of a cabinet door.
Round Knob
A round knob on a single fixing, in a choice of finishes.
Ring Pull
A drop ring on a back plate, hanging from a single fixing, in a choice of finishes.
Rabbet Edge Profile
A square step cut into the outside edge of a cabinet door.
Ogee Frame Profile
A flat mitered frame member with a notch, a small hump and a hollow cove running to a rounded inner edge, grooved to hold a panel.
Ogee Edge Profile
An S-shaped edge that falls away round the outside of a cabinet door.
Ogee Applied Moulding
An S-shaped moulding that rises from the door face to a crest at the edge of a panel or pane.
Handle Finish
Metal and painted finishes for cabinet pulls and knobs.
Half Round Applied Moulding
A rounded bead that stands proud of the door face around a panel or pane.
Grid Mullion Pattern
Evenly spaced mullion bars that divide a glass opening into a grid of equal lites.
Fan Ring Mullion Pattern
A half-round fan of radiating mullion bars around a small half-round lite, over a grid of equal lites.
Fan Mullion Pattern
A half-round fan of radiating mullion bars over a grid of equal lites.
Edge Pull
A profile pull fixed on the edge of a door or drawer front, with a lip to hook the fingers under.
Diamond Mullion Pattern
A vertical mullion bar crossing one or more diamond lites, tied to the sides at the diamond points.
Cup Handle
A shell pull shaped like a half dome, open underneath for the fingers, in a choice of finishes.
Cove Edge Profile
A hollow scooped out of the outside edge of a cabinet door.
Chamfer Edge Profile
A straight angled cut along the outside edge of a cabinet door.
Brushed Aluminum
A metal finish in aluminum, with a brushed surface.
Bow Handle
A curved bow pull fixed at both ends, in a choice of finishes.
Bevel Applied Moulding
A sloped moulding that falls from the outer edge to the edge of a panel or pane.
Bead Frame Profile
A flat mitered frame member with a small notch and a half-round bead along its inner edge, grooved to hold a panel.
Slat Plinth
An aluminium plinth of slats that closes the gap under a base cabinet in a choice of finishes.
Pots And Pans Roll-Out Tray
A roll-out tray on full-extension runners, with a front lip and a back, for pots and pans inside a base cabinet with a pair of doors.
Bevel Shoulder Raised Panel
A raised panel with a long bevel that ends in a steep shoulder at the centre.
Step Raised Panel
A raised panel with a flat shoulder and a square step up to the centre.
Ogee Raised Panel
A raised panel whose centre rises on an S-shaped ogee.
Ramp Shoulder Raised Panel
A raised panel with a long shallow ramp that ends in a steep shoulder at the centre.
Bevel Raised Panel
A raised panel whose centre rises on one long straight bevel.
Two Step Sticking
A two-step edge that ramps down to the panel of a cabinet door.
Cove Sticking
A hollowed edge with a curved cove around the panel of a cabinet door.
Shallow Step Sticking
A shallow step set back from the tip of the edge around the panel of a cabinet door.