What Pro changes
Free has every feature and 3 runs per day. Pro removes that limit. One payment, tied to your 3dshouse account, so it works on every computer you sign in on. Nothing to reinstall and no licence key.
What Regionify does in SketchUp
- Select edges and press Make Faces: closed flat loops become faces, holes included.
- Every closed loop whose edges lie on one plane becomes a flat face; a loop that is not flat is skipped. There is no curved fill.
- One setting, Tolerance (default 0.1 mm, up to 25.4 mm): points closer than it are the same point, so a small break between lines closes when you raise it.
How it compares
SketchUp’s own Edge#find_faces and the free FaceUp extension (MIT, it calls find_faces for each selected edge) build a face only where edges already share vertices. On imported CAD drawings, where lines cross without sharing a vertex, they leave faces out and stack overlapping ones. Regionify splits the crossings first and builds every enclosed cell from the selected edges in one undo step.
Measured results
Faces created versus the reference face count (overlapping face pairs in brackets):
| Case | SketchUp find_faces |
FaceUp 1.2.0 | Regionify |
|---|---|---|---|
| CAD floor plan, 5,936 edges | 252 of 422 (51) | 261 of 422 (84) | 422 of 422 (0) |
| CAD site plan, 8,882 edges | 222 of 349 (17) | 247 of 349 (84) | 349 of 349 (0) |
| 4 x 5 grid of crossing lines, 9 edges | 1 of 12 | 1 of 12 | 12 of 12 |
On a third drawing (3,987 edges: 62 of 62) and on a room with an island, all methods were exact.
Method. SketchUp 2025, public DXF drawings imported with the SketchUp importer, importer faces erased, all edges selected, a fresh model per run. The reference is the polygonize result (shapely) of the imported edges. The find_faces and FaceUp columns and the grid were measured on 2026-11-11 on the flat-face build Regionify was forked from; Regionify’s own face counts were re-measured on Regionify itself on 2026-11-13 (62, 422 and 349 faces, area difference 0.0%, 0 original edges erased, a second press builds nothing).
Drawing sources and licences (public files on GitHub):
- lv_groundfloor: GitHub Pdhruv15/LV-Design-Suit, Apache-2.0 licence
- kj_floorplan and kj_siteplan: GitHub KanJieTeam/kjdraw, Apache-2.0 licence
Limits of this comparison
- Regionify is not faster than
find_faces: 1.9 to 2.6 s per press on 3,987 to 8,882 edges, against 0.2 to 1.7 s forfind_faceson the same files. The faster result is the one with missing and overlapping faces. - S4U Make Face and Eneroth Face Creator were not tested: S4U is paid and needs activation, and Eneroth’s file was not located. No statement here applies to them.
- Two real CAD drawings separate the tools; on the others the difference is none or one face. The grid is a small constructed example.
- Regionify does not find or report gaps: a small break closes only if you raise the Tolerance above it (up to 25.4 mm), and large values can remove faces from thin features. An island loop drawn inside a face without sharing an edge gets a stacked face. Loops that are not flat get no face.
Install
SketchUp 2022 or newer. Download and install steps: Regionify for SketchUp.
Free: limited to 3 runs a day
Pro: unlimited, guaranteed to work, priority support
14-day money-back

