Adjustable Cross
A cast railing fitting with a long sleeve for a sloping rail and a vertical collar for an upright that stays plumb, for stair railings.
Tube fittings 3D models
Parametric 3D models you can customize in the browser and download as GLB, STL or OBJ.
Slight Slope Two Socket Cross
A cast railing fitting for a rail on a gentle ramp, with a long sleeve along the slope and a short sleeve that the vertical upright passes through.
Sloping Two Socket Cross
A cast railing fitting for a stair rail on a slope, with a long sleeve along the slope and a short sleeve that the vertical upright passes through.
Slight Slope Three Socket Tee
A cast railing fitting for a rail on a gentle ramp, with a long sleeve along the slope and a socket below it for the vertical upright.
Sloping Three Socket Tee
A cast railing fitting for a stair rail on a slope, with a long sleeve along the slope and a socket below it for the vertical upright.
Parapet Flange
A cast mounting plate for the top of a parapet with a socket that leans outward to carry a guardrail above it.
Acute Angle Elbow
A cast railing fitting that joins a rail running down a gentle stair to an end post at an acute angle.
Steep Slope Acute Angle Elbow
A cast railing fitting that joins a rail running down a steep stair to an end post at a sharp angle.
Weather Cap
A cast conical cover that sits over the foot of an upright on a base flange to keep water out.
Wall Flange
A cast triangular wall plate with three fixing holes and a socket on its front that fixes an upright to a wall.
Upright Toeboard Connector
A saddle strap that bolts a toe board to a side fixed upright.
Twin Handrail Socket
A cast ring on an upright with a stub on each side that carries a handrail in both directions.
Tube Hook
A cast ring that slides over a tube and carries a hook for hanging a chain.
Tube End Plug
A solid round plug with a domed head that is pushed into the open end of a tube to close it.
Tube Collar
A cast ring that slides over a tube to hold up a fitting that must stay loose, such as a gate hinge.
Toeboard Railing Flange
A cast base plate with a socket for the upright and a slotted back plate that carries a toeboard.
Toe Board Straight Splice
A flat strap with a screw hole at each end that joins two toe boards end to end.
Toe Board Corner Splice
A small right-angle plate with a screw hole in each leg that joins two toe boards at a corner.
Toe Board Clamp
A two-lug clamp that closes round the tube, with a bolt lug on one side and a flat ear plate on the other that holds the toe board.
Swivel Elbow
A cast railing fitting with two sockets joined by a pin, so the second tube can be set at any angle around the pin.
Standard Vertical Railing Flange
A cast wall plate with a socket on its side that fixes an upright to a wall, a parapet or a step.
Standard Horizontal Railing Flange
A cast wide wall plate with a socket in front of it for fixing an upright to a wall or a parapet with the palm of the plate.
Spigot Flange
A cast round base plate with a plug that fits inside a tube, for a light self supporting structure.
Slotted Base Flange
A cast oblong base plate with a slot at each end and a socket in the middle, so an upright can be set a little either way when it is bolted down.
Single Sided Clip
A steel loop that clamps to a tube and holds the edge of a wire panel or a board on one side.
Single Offset Fixing Bracket
A cast ring on a tube with one flat tab that holds the edge of a panel or board.
Single Handrail Socket
A cast ring on an upright with one stub that carries a handrail out from the post.
Sheeting Clip Without Hardware
A wide bent steel strap that clips to a tube and fixes flat or profiled sheeting where the load is only positional.
Sheeting Clip
A bent steel strap that clips to a tube and carries a bolt for fixing profiled sheeting.
Set Screw Cap
A small grey plastic cap that pushes into the recess of a set screw to finish a galvanised fitting.
Round Base Flange
A cast round base plate with a hidden central fixing hole and a socket for the upright.
Roof Flange
A cast rectangular base plate with a ring of fixing holes around its edge and a socket in the middle, for an upright fixed down through a roof deck.
Right Angle Toeboard Connector
A small right-angle bracket with a bolt hole in each leg that joins two toe boards at a corner.
PGR Elbow
A loose cast elbow that joins a top rail to an end post of a pedestrian guardrail.
Pallet Flange
A cast railing fitting with a socket for an upright, a socket on each side and a wide conical foot that locates stacked pallets.
Packer Plate
A flat steel plate that stands a railing flange off the wall so it can sit in a channel or an offset slot.
Offset All Wall Flange
A cast wall plate that holds a socket standing off the wall, for a railing that is set away from the face it is fixed to.
Internal Coupling
A cast railing fitting that joins two tubes of the same size end to end from the inside, with a plug in each tube end and a ring that sits flush with the tube.
Inline Toeboard Connector
A flat strap with a bolt hole at each end that joins two toe boards end to end.
Horizontal Railing Flange
A cast wide wall plate with a tall socket in front of it for fixing an upright with the palm of the plate.
High Capacity Base Flange
A heavy cast square base plate with a socket for the tube and a fixing hole in each corner, for railings that carry crowds.
Extended Base Flange
A cast long base plate with two fixing holes and a socket at one end, so the upright stands at the edge of a deck beside its fixings.
Dual Barrel Flange
A cast rectangular base plate with two sockets side by side, so two uprights stand on one plate.
Double Sided Clip
A steel loop that clamps to a tube and holds the edges of two wire panels or boards, one on each side.
Double Offset Fixing Bracket
A cast ring on a tube with a flat tab on each side that holds the edges of panels or boards.
Decorative Ball
A cast ball cap for the top of a railing post, with a flat underside that seats on the tube.
Cover Flange
A flat cast disc that slips over an upright to finish a post set below the ground.
Capped Twin Handrail Socket
A cast ring with a closed top on the end of an upright, with a stub on each side for a handrail.