Single Layer Welded Panel

By Huu Khanh Nguyen · Updated October 28, 2026 · welded-panel, single-layer, v-fold, pins, wire-mesh

A rigid welded wire panel with the horizontal wires on one face, optionally pressed into V folds for stiffness and finished with pins on one edge.

Parameters

Name	Default	Unit
Width	2500	mm
Height	2030	mm
Spacing between vertical wires	50	mm
Spacing between horizontal wires	200	mm
Horizontal wire diameter	5	mm
Vertical wire diameter	5	mm
Number of V folds	Math.min(sizeZ <= 1230 ? 2 : sizeZ <= 1930 ? 3 : 4, gapCount)
Wire along each fold apex	true
Pin length	30	mm
Pins at	top
V fold depth	25	mm
Gaps between horizontal wires	Math.floor((sizeZ - Math.max(pinLength, horizontalWireDiameter)) / wirePitchUp)
Height of the first horizontal wire	pinSide == 'bottom' ? sizeZ - horizontalWireDiameter / 2 - gapCount * wirePitchUp : horizontalWireDiameter / 2	mm
Number of vertical wires	Math.floor(sizeX / wirePitchAlong)
Position of the first vertical wire	(sizeX - (verticalCount - 1) * wirePitchAlong) / 2	mm
Gaps from fold to fold	Math.floor(gapCount / Math.max(pleatCount, 1))
Height of the lowest fold base	firstRowZ + Math.floor((gapCount - (pleatCount - 1) * foldStep - 1) / 2) * wirePitchUp	mm
Finish	white