Ogee Grille Tile Covering

A tile covering laid in the ogee grille pattern on the face you give it, with grout between the tiles. The face the tiles cover, Tiles cut at the edge, whole inside, or overlapping, Pattern size, tile thickness and edge bevel, Joint widths and joint depth, Pattern rotation and offset from the face center, Tile and grout colour

Details

Category: Tiles › Perforation

By Huu Khanh Nguyen · Updated November 8, 2026

Parameters

Name	Default	Unit
Object On Boundaries	trim
Pattern rotation	0	°
Pattern offset X	0	mm
Pattern offset Y	0	mm
Opening pitch	250	mm
Opening size	0.44
Thickness	10	mm
Edge bevel radius	0.5	mm
Edge bevel segments	5
Horizontal joint	5	mm
Vertical joint	5	mm
Joint depth	5	mm
Generate surface	true
Tile colour	#b8b5ae
Tile roughness	0.5
Tile metalness	0
Joint colour	#d0d0d0
halfWidth	width / 2
halfHeight	(1.2 * width) / 2
patternX	(rings[0].map((p) => p[0]).reduce((m, x) => Math.min(m, x)) + rings[0].map((p) => p[0]).reduce((m, x) => Math.max(m, x))) / 2 + offsetX	mm
patternY	(rings[0].map((p) => p[1]).reduce((m, x) => Math.min(m, x)) + rings[0].map((p) => p[1]).reduce((m, x) => Math.max(m, x))) / 2 + offsetY	mm
wallA	Math.sqrt(((sq) => ((R) => R.reduce((m, A, i) => R.reduce((n, B, k) => (k <= i) ? n : A.reduce((q, p) => B.slice(1).reduce((s, b, j) => Math.min(s, sq(p, B[j], b)), q), n), m), 1e300))(tile))((p, a, b) => ((dx, dy) => ((t) => (p[0] - a[0] - t * dx) ** 2 + (p[1] - a[1] - t * dy) ** 2)(Math.max(0, Math.min(1, ((p[0] - a[0]) * dx + (p[1] - a[1]) * dy) / (dx * dx + dy * dy)))))(b[0] - a[0], b[1] - a[1])))	mm
wallB	Math.sqrt(((sq) => ((R) => R.reduce((m, A, i) => R.reduce((n, B, k) => (k >= i) ? n : A.reduce((q, p) => B.slice(1).reduce((s, b, j) => Math.min(s, sq(p, B[j], b)), q), n), m), 1e300))(tile))((p, a, b) => ((dx, dy) => ((t) => (p[0] - a[0] - t * dx) ** 2 + (p[1] - a[1] - t * dy) ** 2)(Math.max(0, Math.min(1, ((p[0] - a[0]) * dx + (p[1] - a[1]) * dy) / (dx * dx + dy * dy)))))(b[0] - a[0], b[1] - a[1])))	mm