Twin Layer Welded Panel

By Huu Khanh Nguyen · Updated October 28, 2026 · welded-panel, twin-layer, double-wire, wire-mesh

A rigid welded wire panel with a horizontal wire on both faces of every vertical wire, with an optional closer-spaced lower zone and back wires only on some rows.

Parameters

Name	Default	Unit
Width	2510	mm
Height	2030	mm
Spacing between vertical wires	50	mm
Spacing between horizontal wires	200	mm
Horizontal wire diameter	8	mm
Vertical wire diameter	6	mm
Back wire on every nth row	1
Height of the closer-spaced lower zone	0	mm
Spacing between horizontal wires in the lower zone	Math.min(66.6, wirePitchUp)	mm
Pin length	30	mm
Pins at	top
Height of the first horizontal wire	pinSide == 'bottom' ? sizeZ - horizontalWireDiameter / 2 - lowerRows * lowerWirePitchUp - upperGaps * wirePitchUp : horizontalWireDiameter / 2	mm
Rows in the lower zone	lowerZoneHeight > 0 ? Math.floor(lowerZoneHeight / lowerWirePitchUp) : 0
Height of the first row above the lower zone	firstRowZ + lowerRows * lowerWirePitchUp	mm
Gaps between the horizontal wires above the lower zone	Math.floor((sizeZ - Math.max(pinLength, horizontalWireDiameter) - lowerRows * lowerWirePitchUp) / wirePitchUp)
Finish	white