Lay-In Tin Ceiling
A suspended ceiling of pressed tin panels laid into a two-foot grid. Main tees run along the room width, cross tees close every panel edge, hanger rods stand on the mains and wall angle closes the room edge. Room size and plenum depth, Narrow or wide grid face, Hanger spacing, Finish
Details
Category: Ceilings › Tin Ceilings › Tin Panel Ceilings
By Huu Khanh Nguyen · Updated November 4, 2026
Parameters
| Name | Default | Unit |
|---|---|---|
| Room Width | 4800 | mm |
| Room Depth | 3600 | mm |
| Plenum Depth | 600 | mm |
| Panel Size | 609.6 | mm |
| Panel Sheet Thickness | 0.254 | mm |
| Grid Face | 23.8125 | mm |
| Main Tee Height | 43 | mm |
| Cross Tee Height | 38 | mm |
| Main Tee Length | 3600 | mm |
| Hanger Setback From Wall | Math.min(300, (sizeX - 2 * thickness) / 4, (sizeY - 2 * thickness) / 4) | mm |
| Maximum Hanger Spacing | 1200 | mm |
| Wall Angle Length | 3000 | mm |
| Wall Angle Leg | 24 | mm |
| Grid Sheet Thickness | 0.38 | mm |
| Finish | white |